Blind rivet stud round knurled
for automated feeding and processing
This blind rivet stud / screw / bolt with round body provides ideal fastening when installed into soft materials. The knurled grip range ensures increased spin-out resistance. In use at car manufacturer OEMs in Germany, Europe and the USA.
Grip range - 0.5mm bis 8.9mm in standard. In general, larger grip ranges are possible
Thread size - M4, M5, M6, M8, M10, M12
Fastener material - Steel, stainless steel, aluminum
Workpiece material - Aluminum, plastic, magnesium
Available with various head diameters and head heights:
Head geometry Push-out force
Small / flush head Low
Large flange Very high
Body Shape Spin-out resistance
Round, knurled grip range Medium
For further specifications, see blind rivet nut round knurled
| Thread proof load | Thread length | Thread end | Thread tolerance | Thread coating as an option | Surface protection | Special designs |
|---|---|---|---|---|---|---|
| Thread proof load according to strength class 8.8, 10.9, 12.9 possible | according to customer requirements | according to standard, as well as MaThread | 6g, 6h, 6e | Nycote, Precote | Various surface coatings possible, according to customer requirements | Wedged head, large/ reinforced head, closed end, sealed head / sprayed proof, high strength thread, internally floating thread (nut cage) for tolerance compensation |
Request for quotation
Would you like us to call you back? Leave your telephone number or e-mail and we will get back to you as soon as possible!
Application and function
Suitable for: Soft materials, especially aluminum, plastic and magnesium
Pilot hole preparation: Round pre-drilled or punched pilot hole
Preferred use: Especially for one-sided joining positions e.g. difficult-to-reach positions, parts with undercut or overlap, closed profiles
Spin-out resistance - Knurled grip range: For blind rivet fasteners with round body, the knurled grip range provides increased spin-out resistance in softer materials
Push-out force - Larger head diameter vs. countersunk head: For high push-out forces, blind rivet studs with larger head diameters and head heights are recommended. Blind rivet fasteners with a small countersunk head have only low push-out forces. However, their advantage is that the created connection is almost flush with the sheet metal surface. The countersunk head is almost completely embedded into the sheet, so there is only a minor excess of the head above the sheet surface.
If near flushness is required, blind rivet fasteners with a countersunk head should be considered. Other than that, a larger head is recommended due to the higher push-out forces.
